Epson WF-C579R Series User Manual page 93

User's Guide
Item
Auto Reduction
Split Page Settings
Acting Print
Auto Rotation
Add Reception
Information
2-Sided
Print Start Timing
Collation Stack
Print Suspend Time
Quiet Mode
Fax Settings
Description
Prints received faxes with large-size documents reduced to fit on the paper in the paper source.
Reducing may not always be possible depending on the received data. If this is turned off, large
documents are printed at their original size on multiple sheets, or a blank second page may be
ejected.
Prints received faxes with the page split when the size of the received documents is larger than
the size of the paper loaded in the printer.
Make print settings when the document size of the received fax is larger than the size of the
paper loaded in the printer.
Selecting On(Split to pages) splits the document longitudinally to print the received
document. Selecting On (Reduce to Fit) reduces to a 50 % minimum to print.
Rotates faxes received as landscape-orientated, A5 size documents so that they are printed on
A5 size paper. This setting is applied when the paper size setting for at least one paper source
used for printing faxes is set to A5.
Selecting Off, faxes received as landscape-orientated A5 size, the same width as A4 portrait
documents, are assumed and printed as A4 size faxes.
Check the paper source settings for printing faxes and paper size for the paper sources in the
following menus in Settings > General Settings > Printer Settings > Paper Source Settings.
❏ Auto Select Settings
❏ Paper Setting > Paper Size
Prints reception information in the received fax, even if the sender does not set the header
information. The reception information includes the received date and time, sender's ID,
reception ID (such as " #001"), and page number (such as "P1"). When Split Page Settings is
enabled, the split page number is also included.
Prints multiple pages of received faxes on both sides of the paper.
Select options to start printing the faxes to receive.
❏ All Pages Received: Printing starts after receiving all of the pages. To start printing from the
first page or last page depends on the setting of Collation Stack feature. See the
explanation for Collation Stack.
❏ First Page Received: Starts printing when the first page is received, and then prints in order
as the pages are received. If the printer cannot start printing, such as when it is printing other
jobs, the printer starts printing received pages as a batch when it is available.
Since the first page is printed last (output to the top), the printed documents are stacked in the
correct page order. When the printer is running low on memory, this feature may not be
available.
❏ Print Suspend Time: During the specified time period, the printer saves documents received
in the printer's memory without printing them. This feature can be used for noise prevention
at night or to prevent confidential documents from being disclosed while you are away.
Before using this feature, make sure there is enough free memory. Even before the restarting
time, you can check and print the received documents individually from Job/Status on the
home screen.
❏ Time to Stop: Stops printing documents.
❏ Time to Restart: Restarts printing documents automatically.
Reduces the noise the printer makes when printing faxes, however, print speed may be reduced.
93