Replacing The Led Light Bulbs - V-ZUG DFN 6 Operating Instructions Manual

Removing/Installing
▸ Pull the deflector plate com-
pletely out and remove both
grease filters.
▸ Push bar 1 and move the activ-
ated charcoal filter unit 2 down
and out of the bracket.
▸ Replace and dispose of the
spent activated charcoal filter
unit 3.
▸ Reassemble in the reverse or-
der.
The spent standard activated charcoal filter can be disposed of in the
household waste or at a suitable recycling point.
5.5

Replacing the LED light bulbs

Disconnect the appliance from the mains and unscrew the fuse for the
appliance or switch off the circuit breaker. LED light bulbs get hot dur-
ing operation! Allow them to cool down first.
Removing/Installing
▸ Remove both grease filters.
– The light cover can now be
accessed from the back.
▸ Replace the light bulb with a new
light bulb of the same type (see
designation on the light bulb
housing or on the identification
plate).
▸ Insert the grease filters, put back
the screw fuse or switch on the
circuit breaker.
5 Care and maintenance
1
2
3
19