Trouble-Shooting; What To Do If - V-ZUG DFN 6 Operating Instructions Manual

6

Trouble-shooting

6.1

What to do if...

... the illumination is not working
Possible cause
▪ Fuse or automatic circuit
breaker for electrical in-
stallations in the home is
defective.
▪ An interruption in the
power supply.
▪ LED light bulb is defective. ▸ Change the LED light bulb
... the appliance is not extracting enough air
Possible cause
▪ The metal grease filters
are dirty.
▪ Only for recirculation
mode: The activated char-
coal filters are saturated.
▪ Only for extraction mode:
The fresh air intake is in-
sufficient.
20
Solution
▸ Replace the fuse.
▸ Reset the automatic circuit breaker.
▸ Check the power supply.
Solution
▸ Clean the metal grease filters.
▸ Clean and reactivate or replace the activ-
ated charcoal filters.
▸ Ensure the fresh air intake is sufficient.