Electronic Subassembly Installation - SRAM eTap AXS Service Manual

E l e c t r o n i c S u b a s s e m b l y I n s t a l l a t i o n
Install the auxiliary connectors into the hood so the auxiliary connector
1
with the longer wire is in the top slot. Install the battery box into the
hood, making sure the wires are routed beneath the battery box
without being pinched.
Do not pinch the electronic subassembly wires when installing the
battery block into the hood assembly. Pinching the wires can lead to
shifter malfunction or damage to the wires.
Install the longer screw into the auxiliary connector cover and gently
2
tighten.
Do not overtighten the screws. Overtightening the screws can
damage the hood assembly.
Install the shorter screws into the battery box and gently tighten.
3
Do not overtighten the screws. Overtightening the screws can
damage the hood assembly.
NOTI CE
NOTI CE
NOTI CE
T6

Electronic Subassembly Installation

T6
T6
27