Led Indicators; Receiver Status Leds; Power Led - Topcon MR-2 Operator's Manual

LED Indicators

• • • • • •
The LED indicators able you to control receiver power and data recording. The LEDs display the status of the
power, Ethernet connectivity, and satellite tracking. This chapter describes the different LED blink patterns and
what they mean.
Power

Receiver Status LEDs

There are four status LEDs to provide you information about power Ethernet connectivity, and tracked satellites.
This section describes the color and behavior of each LED.

Power LED

The Power LED indicates whether the receiver is on or off, and to indicate the status and type of OAF loaded.
LED Indicators
Ethernet
(Primary Antenna)
Figure 4: LED Indicators
Table 3. Power LED Patterns
LED Color
When the LED is off, the receiver is off.
When the LED is blinking or solid, the receiver is
on and an OAF is loaded. See below for the types
of OAF.
When the LED continuously blinks between red,
green and yellow, a standalone positioning OAF is
loaded.
When the LED is solid green, an RTK-enabled OAF
is loaded.
P/N: 1011907-01
STAT
(Secondary Antenna)
Description
STAT
10