Driver Installation - SIIG 2S1P Quick Installation Manual

Skip this step if you don't need any serial
ports.
6. To install the card, carefully align the card's
bus connector with the selected PCIe slot on
the motherboard. Push the board down
firmly, but gently, until it is well seated.
7. Replace the slot bracket holding screw to
secure the card.
8. Mount the second serial port and secure it
with the slot bracket holding the screw.
Skip this step if you don't need any serial
ports.
9. Replace the computer cover and reconnect
the power cord.

Driver Installation

Please make sure the board is installed before
proceeding with driver installation.
Windows 7 (32-/64-bit)
1. Install the board and boot up Windows.
2. Right click Computer, click Manage, click
Device Manager.
4