SIIG 2S1P Quick Installation Manual page 5

3. Insert the driver CD. Right click PCI Parallel
Port, click Update Driver Software.
4. Click Browse my computer for driver
software.
For 32-bit: Type D:\32bit, then click Next.
(Change D: to match your CD-ROM drive)
For 64-bit: Type D:\64bit, then click Next.
(Change D: to match your CD-ROM drive)
5. At Windows has successfully updated
your driver software, click Close.
6. Right click PCI Serial Port, click Update
Driver Software.
7. Repeat steps 4-5.
8. Right click PCI Serial Port, click Update
Driver Software.
9. Repeat steps 4-5 to complete the installation.
Windows Vista (32-/64-bit)
1. Install the board and boot up Windows.
2. At the Found New Hardware, insert the
driver CD, click Locate and install driver
software (recommended), then click
Continue.
5