Table of Contents
Advertisement
Preparing for Installation
Before you attempt to install the power supply, make sure you have the
following items:
• 1/8" slotted screwdriver
• 1/4" slotted (#2) or phillips screwdriver
• torque screwdriver
• needle-nose pliers
• crimping tool
Installing the Power Supply
Do these tasks to install the power supply:
1. Verify that you are using the power supply on a ControlLogix Series B
chassis.
2. Align the power supply circuit board with the card guides on the left side of
the Series B chassis.
Figure 1
ControlLogix Power Supplies
Publication 1756-IN596A-EN-P - December 2004
7
20264a-M
Hide quick links:
Advertisement
Table of Contents
