Table of Contents
Advertisement
12
ControlLogix Power Supplies
Removing the Protective Label
ATTENTION
Remove the plastic label from the top of the power supply.
Figure 8
Activate the Power Supply
Flip the power switch up to turn the supply on.
Figure 9
Publication 1756-IN596A-EN-P - December 2004
Make sure the chassis is mounted and all panel fabrication is
complete before you remove the protective label. This label
protects the power supply from metal shavings falling inside the
power supply and damaging it during operation.
20264b-M
43615
Hide quick links:
Advertisement
Table of Contents
