Table of Contents
Advertisement
Overview
The CTC-1402 is a 4K 6x Multi-format Inputs Extender Switch with USB extension and includes a scaler for CTC-1402 The
transmitter and receiver kit offers six video inputs shared between both devices for HDMI, Display Port, VGA plus analog audio
in and USB-C video signals. To simplify conference room device management, the kit provides four USB type B connectors for
host Computers. Six built-in USB hubs, three on the transmitter and three on the receiver, allow for the use of numerous Human
Interface Devices (HID) as well as USB cameras and microphones.
The kit is compatible with sources up to 4K / 60Hz with 4:4:4 color subsampling. All audio, video, data, control, USB, and Ethernet
transmission between the two devices is carried over a single, Ethernet-enabled HDBaseT link up to 328 feet (100 meters).
The CTC-1402 simplifies classroom and small office system integration, for installation beneath conference tables and in lecterns,
to provide localized presentation switching support.
Features
•
Built-in scaler and DSC
•
Supports up to 4K@60Hz 4:4:4 8bit HDMI In/Out
•
Supports HDMI 2.0 and HDCP 2.2
•
Provides a variety of interfaces, including USB-C, to simplify meeting room devices management
•
Supports USB hosts like Desktop and Laptop, USB devices like keyboard/MIC/Speaker/Camera/Whiteboard for conference
systems
•
Automatically detects active inputs when sources are connected or there is a source signal change
•
Ethernet can be imported from either receiver or transmitter, providing LAN accessibility for users
•
The source device with USB-B or connected with USB-C will be controlled by the USB device via video auto-detection
technology
•
Control or upgrade via Harman NetLinx studio, Control of 3rd party devices via serial port of the CTC-1402
•
Allows control of connected displays On/Off via CEC by using NetLinx studio or front panel buttons
•
Allows control relay such as the raising and lowering of project screens
•
RS232 bi-directional pass through
•
IR pass through from TX to RX
•
De-embedded Audio Out/In Receiver
•
Supports fast switch
Package Contents
•
1 x CTC – 1402 Transmitter
•
1 x CTC – 1402 Receiver
•
2 x DC 12V Power Adapter (with US, UK, EU Power Cords)
•
1 x Broadband IR Receiver (30KHz-50KHz)
•
1 x IR Emitter
•
8 x Phoenix Male Connector (3.5mm, 3 Pins)
•
1 x Phoenix Male Connector (3.5mm, 2 Pins)
•
4 x Mounting Bracket (with Screws)
User Manual - CTC-1402
6
Advertisement
Table of Contents
