Send Commands To Control A Device; Telnet Control Via Netlinx Studio - AMX CTC-1402 User Manual

Send Commands to Control a Device

Click "Diagnostics" on the menu bar, choose "Control a Device".
A window will display as follows, enter a command in the textbox, and click "Send To Device". (For API commands, see the Section API
Command Set.)

Telnet Control via NetLinx Studio

Choose the device you want to control, right click, then choose TELNET Window->Launch TELNET window via NetLinx Studio,
1.
enter the Telnet window, input the Telnet API in this window to control the device.
Note: For API Commands, see the section API Command Set
User Manual - CTC-1402 26