Table of Contents
Advertisement
Upgrade Status
To upgrade the firmware of the device, click
LOGOUT
Click
Firmware VERSION
Click
Auto Switch:
Users can enable or disable the Auto Switch function in this column. Auto Switch ON is the default. For more information, refer to the
Input Source Switching section.
When set to OFF, switching the source can only be Manual.
Key Lock
In this column, users can set the key lock On/Off.
•
ON: The panel buttons are disabled for switching the sources and displays.
•
OFF: The panel buttons are active for switching the sources and displays.
HDCP
In this column, users can Enable/Disable the HDCP of TX HDMI, USB-C, RX HDMI 1, and RX HDMI 2 ports.
•
ON: Input ports support HDCP.
•
OFF: Input ports do not support HDCP.
User Manual - CTC-1402
, to return to the Login page.
to check the current firmware version.
, to check the upgrade status.
31
Advertisement
Table of Contents
