Table of Contents
Advertisement
Installation
Warning: Before installation, ensure the device is disconnected from the power source.
Installation:
1.
Attach the installation bracket to the enclosure using the screws provided.
The bracket height can be adjusted Up/Down>The bracket can face up or down.
2.
The bracket is attached to the enclosure as shown.
3.
Repeat steps 1-2 for the other side of the unit.
4.
Attach the brackets to a surface or suitable location with user supplied screws.
5.
Repeat steps 1~4 to install the receiver.
User Manual - CTC-1402
17
Advertisement
Table of Contents
