AMX CTC-1402 User Manual page 51

Telnet/SSH Commands (cont.)
No. Command
set time
9
show mem
10
time
11
show vs100
12
stats
13 echo
exit
14
msg
15
reboot
16
User Manual - CTC-1402
Description
Set the current time.
Display the memory usage for
all memory types.
Display the current time.
Displays DXLink transport
information (MSE values,
length, etc.).
Enable/disable echo of typed
characters.
Close this terminal session.
Enable/Disable extended
diagnostic messages.
Reboot the device.
Example
>set time
Usage: set time [hours] [minutes] [seconds]
Arguments:
hours integer value of hours between 0 and 23
minutes integer value of minutes between 0 and 59
seconds integer value of seconds between 0 and 59
Example:
set time 13 30 00
>show mem
RAM available: 349634560 bytes
RAM total: 406167552 bytes
>time
The current time is: 11: 57: 09 PM
>show vs100 stats
VS100 STATS: 50.
>echo
Usage: echo [argument]
Arguments:
on Enable echo of typed characters
off Disable echo of typed characters
Example:
echo on
>exit
>msg
Usage: msg [argument]
This command allows system logs to be redirected to the terminal
session.
There are multiple log levels, which are described below.
Arguments:
on Enable default [warning] system log level
debug Enable all system debug messages
info Enable info system log level
warning Enable warning system log level
error Enable error system log level
off Disable system log output to terminal session
Example:
msg on
>reboot
51