Menus of Commands
The following menus contain keys for built-in operations, most of
which are programmable commands. For a brief description of the
commands in each menu, see appendix D, "Menu Map." The Refer-
ence Manual covers these menus in alphabetical order and describes
them in detail.
The action of the keys in these menus depends on the entry mode,
described on page 169.
Vector and matrix commands.
Integer arithmetic, base conversions, bit
Logarithmic, exponential, hyperbolic functions.
User memory, directories.
Display, angle, recovery modes.
Program branch structures.
Program control, halt, and single-step operations.
Flags, logical tests.
Real number commands.
Numerical and symbolic solution commands, the