Heat Sink - HP OMEN 15-ce100 Maintenance And Service Manual

Heat sink

NOTE: The heat sink spare part kit includes replacement thermal material.
Description
Heat sink (for use only on computer models equipped with an Nvidia N17E GPU)
Heat sink (for use only on computer models equipped with an Nvidia N17P Generation 1 GPU)
IMPORTANT:
and replacement
Before removing the heat sink, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
a. Hinge covers (see
b. System support brackets (see
c. Fans (see
Remove the heat sink:
1. Following the 1 through 8 sequence stamped into the heat sink, loosen the eight captive Phillips screws
(1) that secure the heat sink to the system board.
Make special note of each screw and screw lock size and location during removal
Battery on page
Hinge covers on page
Fans on page 49).
36), and then remove the following components:
45).
System support brackets on page
Spare part number
929559-001
929457-001
46).
Component replacement procedures 53