Wlan Antennas - HP OMEN 15-ce100 Maintenance And Service Manual

WLAN antennas

NOTE: The WLAN antennas spare part kit includes the cable and antennas.
Description
WLAN cable and antennas
IMPORTANT:
and replacement
Before removing the WLAN antennas, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
a. Hinge covers (see
b. System support brackets (see
c. Heat sink (see
d. System board (see
e. Display assembly (see
f. Display bezel (see
g. Display panel (see
Remove the WLAN antennas:
1. Release the WLAN antenna cable from the clips securing it to the back cover (1).
Make special note of each screw and screw lock size and location during removal
Battery on page
Hinge covers on page
Heat sink on page
System board on page
Display assembly on page
Display bezel on page
Display panel on page
36), and then remove the following components:
45).
System support brackets on page
53).
58).
61).
66).
72).
Spare part number
929441-001
46).
Component replacement procedures 77