TouchPad
NOTE:
The TouchPad spare part kit includes the TouchPad connector cable, but does not include the
TouchPad bracket.
Description
TouchPad board (with connector cable)
TouchPad bracket
IMPORTANT:
and replacement
Before removing the TouchPad, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
Speakers (see
▲
Remove the TouchPad:
1.
Disconnect the TouchPad connector cable from the system board (1).
2.
Disconnect the TouchPad from the keyboard/top cover (2).
3.
Remove the 4 Phillips PM2.0×3.4 screws (3).
4.
Remove the TouchPad bracket.
Make special note of each screw and screw lock size and location during removal
Battery on page
Speakers on page
36), and then remove the following components:
40).
Spare part number
929472-001
929462-001
Component replacement procedures
43