2
External component identification
Right side
NOTE:
Refer to the illustration that most closely matches your computer.
Component
(1)
(2)
(3)
(4)
(5)
4
Chapter 2 External component identification
Power connector
AC adapter and battery light
USB SuperSpeed ports (2)
Drive light
Memory card reader
Description
Connects an AC adapter.
●
White: The AC adapter is connected and the battery is
fully charged.
●
Blinking white: The AC adapter is disconnected and the
battery has reached a low battery level.
●
Amber: The AC adapter is connected and the battery is
charging.
●
Off: The battery is not charging.
Connect USB devices, such as a cell phone, camera, activity
tracker, or smartwatch, and provide high-speed data transfer.
●
Blinking white: The hard drive or the solid-state drive is
being accessed.
●
Amber: HP 3D DriveGuard has temporarily parked the
hard drive.
Reads optional memory cards that enable you to store,
manage, share, or access information.
To insert a card:
1.
Hold the card label-side up, with connectors facing the
computer.
2.
Insert the card into the memory card reader, and then
press in on the card until it is firmly seated.
To remove a card:
▲
Press in on the card, and then remove it from the
memory card reader.