System-Wide Parking; Parking A Call Automatically And Taking It At A Later Date - Siemens OptiPoint 410 Operating Instructions Manual

Step by Step
System parking
System parking

System-wide parking

On the HiPath 4000, you can park up to 10 internal and/
or external calls and take them at another telephone.
There are two ways of parking a call:
• Automatic parking
• Manual parking
Parking is not possible if:
• All park positions are occupied
• The park position you want is occupied
• The subscriber is the operator
• The call is a consultation call
• The call is a conference call
Parking a call automatically and taking it at a
later date
You can automatically park a call to your telephone in a
free parking position and take it at your telephone or an-
other telephone.
Parking
Press key (must be installed).
The first free parking position number is seized and in-
dicated in the display. The call is parked.
Also, you can initially place the call "on hold" by
confirming "consultation" and then parking the
call.
t
Replace the handset.
Taking a parked call
Press key.
d m
... Enter the parking position number of the parked call and
continue the call.
Making Calls – Convenience Functions
47