Call Forwarding; Using Call Forwarding - Siemens OptiPoint 410 Operating Instructions Manual

Making Calls – Basic Functions
Step by Step
18

Call Forwarding

Using call forwarding

You can program two types of call forwarding:
• Station fixed forwarding
• station variable forwarding
With station fixed forwarding you can program a for-
warding destination that will remain valid until you
change or delete it. This forwarding function can be
switched on and off.
With station variable forwarding you can choose be-
tween 6 different types of forwarding:
• Station variable unconditional/all forwarding
– forwarding for internal calls only
– forwarding for external calls only
– forwarding for both internal and external calls
• Forwarding for busy (int/ext)
• Forwarding after no answer (int/ext)
• Forwarding for busy and ring no answer
Call forwarding is activated when a forwarding destina-
tion is programmed. When the station variable forward-
ing function is switched off, the forwarding destination
is automatically deleted
When forwarding is activated you can see the following
display in the idle menu:
Forwarding type
Station fixed forwarding
Station variable
forwarding
Forwarding for internal/
external calls only
Forwarding for busy
Forwarding after time
Forwarding for busy and
ring no answer
Station fixed forwarding Fixed forwarding On
See page 58 to find out how to activate/de-activate
call forwarding via codes or an installed forwarding key.
1. Station fixed forwarding is optional
1
, and
Display message
Forwarding to e.g. 222 Eric
Brown (own number)
Forwarding for internal/
external On
Forwarding on busy On
Forwarding on timeout On
Forwarding on busy or
timeout On