Siemens OptiPoint 410 Operating Instructions Manual page 23

Step by Step
>
Var. call forw. on?
Save?
program/service
Destinations?
Call forwarding?
Next forwarding type? >
Next forwarding type? >
Next forwarding type? >
>
Deactivate?
FWD-ALL-INT off
Activating station variable forwarding
Station variable forwarding is automatically activated
when the forwarding destination is programmed.
Unconditional variable programming can also be activat-
ed in the idle menu.
:
Select and confirm while the phone is idle.
p
Enter the number of the destination.
If you enter a cross-system number, you must
r
press
:
Confirm. This also activates the forwarding facility.
Deactivating station variable forwarding
You can deactivate all station variable forwarding types
in the Service Menu.
Press the key. The lamp lights up.
:
Confirm.
:
Confirm. Display shows "Station variable forwarding".
:
Confirm. Display shows "Station fixed forwarding".
:
Confirm. Display shows "Forwarding for internal".
>
Open a forwarding type, for example, "Forwarding for in-
ternal".
:
Select and confirm. Station variable forwarding is deac-
tivated and the forwarding destination is deleted.
Output on first line, for example, for "Forwarding for in-
ternal".
To select another station variable forwarding type, pro-
ceed as described on
Checking forwarding
To check up on the status of the forwarding types, pro-
ceed as described on
"OFF" is shown in the first line. The forwarding destina-
tion is shown in the second line display if this station
variable forwarding type is activated.
Making Calls – Basic Functions
after entering the number.
page 21.
page 21. The status "ON" or
23