Storing And Activating A Station Fixed Call Forwarding Destination For A Line; Reactivating Station Fixed Call Forwarding For A Line (Without Storing A Different Destination) - Siemens OptiPoint 410 Operating Instructions Manual

Step by Step
Line
program/service
Line
Call forwarding
program/service
>
Feature settings?
>
Call forwarding?
>
Activate?
Storing and activating a station fixed call
forwarding destination for a line
Precondition: The telephone is in the idle state.
Press the line key for the required line. The lamp lights
up.
Press the key. The lamp lights up.
The settings for station fixed forwarding for every line
are identical with the call forwarding function described
above. Therefore, for all further steps see
Reactivating station fixed call forwarding for
a line (without storing a different destination)
Precondition: The telephone is in the idle state.
Press the line key for the required line. The lamp lights
up.
With the call forwarding key:
Press the key. The lamp lights up.
Via the program/service key:
Press the key. The lamp lights up.
fi
Enter the service code.
or
:
Select and confirm.
:
Select and confirm.
:
Confirm.
For further information see
Making multiline calls
page 19.
page 19.
85