Table of Contents
Advertisement
9. At the back of the device, turn the release wheel toward the lock icon to lock the pod trays.
The release wheel is now red. The pod trays are locked.
10. Make sure that all pod trays are closed, locked, and no longer able to open.
11. Close the device door.
When the device is powered on, a message displays on the screen. This prompts you to restart the device
and return it to a normal operating condition. See Reset Device After Manual Access section for instruction.
Reset Device After Manual Access
Once you manually access the InPower™ Personal Medication Assistant, you are required to restart the de-
vice. When the device is powered on, complete the following steps to return it to normal operating condition.
1. Make sure that all pod trays are closed, locked and no longer able to open.
2. Close the device door.
3. From the back of the device, turn the white release wheel to the right, to return it to the
locked position.
The release wheel is now red. The pod trays are locked.
4. Open the device door, input PIN if necessary. From the Restart from Manual Access screen,
tap Restart device.
The device verifies active pods and the tray locations. You are prompted based on the results of
the verification.
5. If prompted, remove pod from device. Tap Ok, I'm ready. Otherwise proceed to Step 8.
A pod tray opens.
6. Remove the pod from the tray, and then tap I've removed the pod.
The tray closes. The device verifies that the pod was removed. A message displays indicating that you
re moved the pod from the tray and must now put the pod in to the device.
Repeat steps 6 – 7 to remove all pods from the device.
7. Tap Tap to Continue.
35
Advertisement
Table of Contents
