Initial Phone Settings; Master Reset; Keypad Lock; Lock And Unlock Your Phone - Ericsson ACeS OG698 User Manual

Initial Phone Settings

You will need to set certain parameters before using your phone for the first
time. You will need to set other parameters before using some of the features.
You can also personalize your phone by changing settings such as the ring
tone or melody, ring level, or display light. See "Personalize Your Phone" on
page 29.

Master Reset

If you should make changes and then decide that you do not want to keep
those changes, you can reset your phone to the default factory settings with the
following procedure:
‚ # 1 Access the SETTINGS menu and select Mas-
Ø
@
ter reset
SETTINGS
Master
2 Enter your phone lock code and press YES
¯ reset ˘
Version P1C

Lock and Unlock Your Phone

Keypad Lock

‚
ÂACCESS ¬
¯
Phone Lock
The phone lock protects the phone against unauthorized use in the event of
theft. It is not activated when you purchase the phone.
‚
ÂACCESS ¬
¯ Phone lock
(Unlocked)

Set Phone Numbers

You may have as many as three different phone numbers associatedwith your
satellite subscription. If the phone numbers exist on your SIM and your sub-
scription allows you to change the numbers, you can store them and display
them when needed.
Note: Some features and menus are operator dependent
#
Use the ACCESS menu to lock the keypad on
Ø
your phone so keys cannot be accidently pressed
˘
Keylock when you are transporting it. See "The Key Lock"
on?
on page 74 for instructions on locking and
unlocking the keypad.
#
Use the ACCESS menu to set a Phone lock or
Ø
Key lock code, to change your code, lock your SIM
card, or to bar certain incoming or outgoing calls.
˘
See "The Phone Lock" on page 73 for detailed
instructions.
Page 12