Satellite Only Mode; Satellite Preferred Mode; Gsm Only Mode - Ericsson ACeS OG698 User Manual

ACeS OG698 Phone User's Guide
Position Antenna indicates a satellite net-
‹ @
Ø
work was found but your radio signal is not strong
Position Ant
enough to make or receive calls. You must posi-
tion your antenna until a full circle is displayed.
¯ ˘
‚ @ Until a strong signal is located the message No
Ø
Network/Position Antenna displays
SearchingSAT
short

Satellite Only Mode

If you have selected Satellite Only as your default mode, a search for a sat-
ellite signal begins with the message Searching Sat Short or Searching
Sat Long. See "Set Satellite Search Preferences" on page 15 for more infor-
mation.
If the last search completes without finding a
0
satellite, No network is displayed. After a short
No Network
while the search will repeat.
If you want to restart the search process at any
‚ @
Ø
time, select NETWORKS/New Search. (See
NEW SEARCH
"New Search" on page 21.)
Page 20

Satellite Preferred Mode

When you select Satellite Pref mode as the default, and a search for a satel-
lite begins, your phone displays the messages Searching Sat/Short or
Searching SAT/Long.
‹
SearchingSAT

GSM Only Mode

fi
‚
NETWORKS #
¯
Note: Some features and menus are operator dependent
If no network is located, No network is dis-
@
Ø
played and the search will restart after a short
while
short
04:25 You can enter NETWORK/New Search at
any time to restart the search process or change it
When you select GSM Only mode a search
fl !
begins for a GSM network and the message
Searching
Searching GSM is displayed
GSM?
No network
If no network is found, No network is dis-
played. The signal strength indicator will indicate
none
You can enter NETWORKS/New Search at
#
any time to restart the search process
New Search
˘
GSM
Version P1C