Composing And Sending Messages - Ericsson ACeS OG698 User Manual

fl 2 Scroll to Options, using the navigation key,
› @
and press YES
OPTIONS
3 Scroll to the Msg type option and press YES
¯ Msg type ˘
4 Select the required format, using the naviga-
tion key, and press YES
Note! Standard means an ordinary text message (SMS) to other phones. Stan-
dard is the default message type.

Composing and Sending Messages

To compose your message, enter characters using the numeric keys.
Press the appropriate key, 1–9, 0 or #, repeatedly until the desired character
appears in the display. See "Entering Characters" on page 58.
If there is a pause of more than 60 seconds between entering characters, the
phone will return to the standby menu.
Sending Messages
1 From the Mail menu, select Send mes-
fl
› @
MAIL %
sages. New appears.
Send Messages
2 Press YES. An empty display appears.
¯ New ˘
3 Enter your message (see above "How to Enter
Letters").
Version P1C
4 You can scroll through the message text with the navigation key and erase
characters to the left of the cursor or insert characters in the cursor's posi-
tion.
5 Press YES. Request reply? appears.
6 If you want a to reply to the message, press YES. If not, press NO.
7 Enter the receiver's phone number or recall it from the phone book
To send the message now, press YES
To store the message for later use, press NO
The message is now stored in the messages memory
If you decide to send the message later, the message is labelled To send
instead of Sent when you access the message in the Send messages menu.
The same procedure is used regardless of what type of message (e-mail, fax,
etc.) you are sending.
Note! Reply and Send are not available in satellite mode.
Reading a Message
When you receive a message, a signal sounds and the display informs you of it.
The indicator light on the top of the phone blinks rapidly green.
If you want to read the message at once, press YES
If you want to read the message later on, press NO. The message will be
stored in the Messages memory and a letter icon is shown to the left at the
bottom of the standby display. Press any key (0-9, *, #) to clear the New
Message message.
Note: Some features and menus are operator dependent
ACeS OG698 Phone User's Guide
Page 67