Changing The Pin2 Code - Ericsson ACeS OG698 User Manual

ACeS OG698 Phone User's Guide
2 Enter your PUK (or PUK2) code (look in the
information from your network operator)
3 Enter a new 4-to-8 digit PIN (or PIN2) code
and press YES
4 Reenter the new PIN (or PIN2) code to confirm
it and press YES
Warning! If you enter the wrong PUK code ten
times in succession, your card will be perma-
nently blocked. If this happens, contact your net-
work operator for a new SIM card.
Changing the PIN Code
You need to change your PIN code on a regular basis to prevent unauthorized
use of your subscription. To change your PIN code:
1 From the ACCESS menu, select Change
¤ @
$
PIN code.
ACCESS
Change
¯ PIN code ˘
2 Enter the old (current) PIN code and press
¤ @
YES
Enter
PIN
Page 72
¤
¤
¤

Changing the PIN2 Code

Depending on the network you use, some services require a second PIN code,
the PIN2 code. If your SIM allows it, you can change your PIN2 code.
¤
Note: Some features and menus are operator dependent
3 Enter the new PIN code and press YES
@
Enter
New PIN
@ 4 At the prompt Repeat new PIN enter the
new PIN a second time to verify it
Repeat
new PIN
The message New PIN confirms that the PIN
code has been changed.
If the message Matching error appears, the
new PIN was entered incorrectly
@ If the message Wrong PIN appears, followed
by Enter Old PIN the old PIN was entered
Wrong PIN
incorrectly
1 Select Change PIN2 code from the
@
$
ACCESS menu
ACCESS
Change
2 Follow the same procedure as described in "To
PIN2 code
Change the PIN code"
Version P1C