Extensive Search; Single Search For A Gsm Network; Search Without Changing Defaults; Update The Network Lists - Ericsson ACeS OG698 User Manual

Extensive Search

If no other satellite search is suggested you can select an Extensive search.
To select an Extensive search (this may take several minutes):
1 Select NETWORKS/Search opt/Satel-
‚ @
Ø
lite and press YES
ONE SEARCH
Spot beam
(27)
‚ 2 Scroll to SEARCH OPT/One search and
@
Ø
press YES
SEARCH OPT
¯ ˘
One search
3 Select ONE SEARCH\Extensive
‚ @
Ø
search. Please wait... will display
ONE SEARCH
Extensive
search
4 When a network is located you are prompted to
select it or reject it.
The information displayed refers to:
System operator: Home or Roam
Spacecraft (multi-spacecraft system only): Home or Roam
Press YES to accept the Satellite Network displayed
Press NO and the search will continue
Version P1C

Single Search for a GSM Network

You must be in GSM mode to attempt to access the NETWORKS/Search opt/
GSM menu. To perform a single search for a GSM network:
‹
NETWORKS #
Search opt
¯
⁄
SEARCH OPT
Select net
¯
4 Press YES to search for this network

Search Without Changing Defaults

You can search for a satellite or GSM network without changing the default
search pattern with the New Search option. See "New Search" on page 21.

Update the Network Lists

You can update the GSM and the Satellite network lists, which are used when
searching for service, one list at a time.
Note: Some features and menus are operator dependent
ACeS OG698 Phone User's Guide
@ 1 Scroll to NETWORKS/Search opt/GSM
Ø
and press YES
˘
GSM
2 SEARCH OPT/Select net displays. Press
\
@
YES. The list of GSM networks is dis-
played
˘
3 Scroll through the list of networks until the
network you want to use is displayed
Page 23