Setting Up Your Computer; Initial Setup - Ericsson T60c User Manual

Note! The availability of digital mobile voice service does
not necessarily imply that your mobile service
operator supports digital data operation.

Setting Up Your Computer

To operate properly with the modem in your Ericsson
mobile phone, make sure that your computer has the
following hardware and software:
• A functional serial port
• An operating system that supports data access soft-
ware, such as Windows 95 or Windows 98
• Appropriate fax (class 2.0), Internet access, or file
transfer software
Note! Class "2.0" is different from Class "2".

Initial Setup

Successful first-time setup of your phone and computer
for data operation involves the following steps:
Making Data and Fax Calls
1 Connect Your Computer to Your
Phone. Your Ericsson DA 18
Phonebook Manager Accessory
Kit contains a serial interface
cable (the cable can also be pur-
chased as a separate accessory).
The cable has a plug on one end that matches the
receptacle on the bottom of your Ericsson mobile
phone. The other end of the cable has a 9-pin
female connector that matches the standard 9-pin
serial interface port connector. Connect one end of
the cable to your Ericsson mobile phone and the
other end to the serial port on your computer.
Note! If you are trying to connect to a 25-pin serial
interface port on your computer, you will need an
adapter. You can purchase a 25-pin serial interface
port adapter at most computer supply stores.
2 Install Your Modem Control Software (driver)
The modem control software (driver) that you need
to use your Ericsson mobile phone is available at
http://mobileinternet.ericsson.com. Refer to the
71