Initial Phone Settings; Set Clock; Keypad Lock; Set Language - Ericsson SATELLITE R290 User Manual

Initial Phone Settings

You will need to set certain parameters before using your phone for the
first time. You will need to set other parameters before using some of the
features.
You can also personalize your phone by changing settings such as the
ring tone or melody, ring level, or display light. See "Personalizing Your
Phone" on page 30.

Set Clock

Your phone displays the time when in stand-by mode. During a call, it
displays the time elapsed since the call began. You can also set other
clock-related functions such as date, time and date format and the alarm.
See "Clock" on page 33.

Keypad Lock

Use the menu to lock the keypad on your phone so keys cannot be
accidentally pressed when you are transporting it. See "Keypad Lock" on
page 38 for instructions on locking/unlocking the keys.

Set Language

English is the default language in your phones display. In phones with
more than one language available you may change the language, see
"Language" on page 35.

Network Settings

You will need to set defaults for the networks you will use before you use
your phone for the first time, see "Selecting a Network" on page 12.

Mode Switch

To switch network mode from satellite to cellular or vice versa press
SOFT LEFT, then press 4.
NOTE:
• If the user is in satellite only mode selecting this option displays the
following screen for 4 seconds and then returns to GSM standby.
• If the user is in cellular only mode selecting this option displays the
following screen for 4 seconds and then returns to satellite standby.
Mode Menu
Access the Service Setup Mode Menu to select the mode of operation.
Press SOFT LEFT, 6, 3 and 1. The display will show:
The asterisk indicates the mode currently in operation. In this case, the
mode is Satellite only.
R290 User's Guide
11