Table of Contents
Advertisement
1
Press the number 1 key
2
Press the number of the member you want to release. If you, for example,
wish to release member number three, press the number 3 key
3
Press YES
Making a Call while a Conference Call is in Progress
To make a call while participating in a conference call, do the following:
Enter the number you wish to dial and press YES
The conference call is put on hold.
To switch between calls, press YES
To end the new call and return to the conference call, press 1 and YES
See "Conference Calls" on page 46 for more details.
Ending a Conference Call
Press NO to end the conference call and disconnect all members.
Caller ID
If your subscription and the person you are calling's subscription supports
Caller ID service, that person's name and number will display on your phone.
You can enable or disable the Caller ID function for a particular call. See "Hid-
ing or Showing Your Number" on page 39
Version P1C
Fixed Numbers Dialling
If you have a SIM card with FDN (Fixed dial number) you can turn the feature
on or off.
¤
ACCESS
¯
Fixed dial
Call Time/Call Cost Information
You can display the call time for satellite or GSM calls (both incoming and
outgoing), or for outgoing calls only, and cost of GSM calls. First you must set
what type of information you want to display. Satellite mode will not display
cost information.
To set the call information you want displayed:
¤
SETTINGS @
¯
Call info
(Time: Outg.)
Note: Some features and menus are operator dependent
ACeS OG698 Phone User's Guide
@
1
From the ACCESS menu, select Fixed dial
$
2
Enter your PIN when prompted
˘
3
Select ON or OFF
(On)
Also see "Fixed Number Dialling" on page 74 in
the "Security" section.
1
Select Call info from the SETTINGS menu
@
W
2
Select Time: Outg, Time: All or Cost
˘
Page 47
Advertisement
Table of Contents
