CCIC1410 Installation Wizard
8.3
User interface of the CCIC1410 Installation Wizard
8.3.1
Select a device for the configuration
24
Siemens Building Technologies
Fire Safety & Security Products
On the left side, several function buttons are situated, e.g. the Manual Setup
button, etc. When you click on the arrow button, you will see more advanced
functional buttons.
1.
Open the CCIC1410 Installation Wizard, see chapter 8.2.
2.
Select a device in the device list by clicking on it.
The three buttons on the left ("Manual Setup", "Firmware Upgrade", and
"Restore Default") will not be enabled until at least one device is selected.
05.2009