Refreshing The Device List (And Linking To The Devices); System Settings; Open The System Settings Page - Siemens CCIC1410 Configuration Manual

8.3.2

Refreshing the device list (and linking to the devices)

8.4

System settings

8.4.1

Open the system settings page

Siemens Building Technologies
Fire Safety & Security Products
Clicking on the Refresh Devices button will refresh the device list and search for
all devices on the LAN again. Refreshing the device list will take several seconds.
If you want to link to your device, double-clicking it on your device list will lead you
to the browser for operating your device.
1. Select a device for which you want to change the settings in the device list
(see chapter 8.3.1: Select a device for the configuration).
2. Click the Manual Setup button on the left side.
When one device is selected in the device list, the Manual Setup button
will be enabled.
CCIC1410 Installation Wizard will try to connect to the selected device.
If the authentication fails, a dialog will pop up asking you for the correct
password.
Fig. 1 Authentication dialog
If an incorrect password is entered three times, the CCIC1410 Installation
Wizard will show you a warning dialog window and abort the connection to
the selected device.
When the connection to the selected device has been established, the
CCIC1410 Installation Wizard will switch to the system settings page.
CCIC1410 Installation Wizard
05.2009
25