Adjust Date And Time; Network Settings; Pppoe Setting - Siemens CCIC1410 Configuration Manual

8.4.4

Adjust date and time

8.5

Network settings

8.5.1

PPPoE setting

Siemens Building Technologies
Fire Safety & Security Products
1. Open the system settings page (see chapter 8.4.1).
There are three ways to adjust the system date and time settings:
"Synchronize with computer time":
The easiest way is synchronize the device with your computer time.
"Set date and time manually":
Set the date and time manually by entering new values. Note the format in the
respective fields while typing.
"Synchronize to network time server automatically":
The device is automatically synchronized with timeservers over the Internet
every hour.
If you want to keep the current date and time, select "Keep current date and time".
Fig. 3 Date/Time setup
1. Open the system settings page, see chapter 8.4.1.
2. Click Next.
The following dialog window appears:
3. Click Yes.
You will be led to the PPPoE setting page. On this page, you can enter the
"PPPoE username" and "PPPoE password" provided by your ISP, and then
the server will be set to PPPoE mode rather than LAN mode when the
setup is completed. If you do not have the account information, please
contact your ISP.
The PPPoE setting page appears.
CCIC1410 Installation Wizard
05.2009
27