Http - Siemens CCIC1410 Configuration Manual

Mjpeg / mpeg4 dual-streaming indoor colour camera
Hide thumbs Also See for CCIC1410:
Table of Contents

Advertisement

9.7.2

HTTP

Siemens Building Technologies
Fire Safety & Security Products
1.
Open the CCIC1410 Homepage (see chapter 9.1).
2.
Choose the Configuration menu.
3.
On the left hand side, choose the menu item Network.
4.
Define the settings.
5.
Click Save.
Authentication
Depending on your network security requirements, the network camera provides
two types of security settings for an HTTP transaction: basic and digest.
If basic authentication is selected, the password is sent in plain text format; there
is a potential risk of being intercepted.
If digest authentication is selected, user credentials are encrypted in MD5
algorithm and thus provide better protection against unauthorized accesses.
Primary stream port / Secondary stream port
The primary and the secondary stream are accessed via different port numbers.
Please define the port numbers for each video stream according to your network
requirements.
The port number can be assigned between 80 and 65535. If the ports are
incorrectly assigned, a warning message will be displayed.
Stream name:
Access name for stream 1 or stream 2.
If port of motion jpeg stream 1 is 80, the cgi to request stream 1 is
http://192.168.0.10:80/cgi-bin/liveimage.
If port of motion jpeg stream 2 is 81, the cgi to request stream 2 is
http://192.168.0.10:81/cgi-bin/liveimage.
Please note that the stream name is the same for stream 1 and stream 2.
The Web server will have the same ports as the motion jpeg streaming ports
(stream1 and stream2). Actually, there are 2 ports for webpage access and the
motion jpeg streaming server also uses these 2 ports for dual streams. They are
linked and cannot be separated.
NOTE
To utilize the HTTP authentication, make sure that you have set a password for the network camera
first.
Microsoft® Internet Explorer does not support server push technology; therefore, using
http://<ipaddress>:<http port>/<access name for stream1 or stream2> will fail to access the
network camera.
Configuration with the CCIC1410 Homepage
55
05.2009

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents