Siemens CCIC1410 Configuration Manual page 76

Configuration with the CCIC1410 Homepage
76
Siemens Building Technologies
Fire Safety & Security Products
Trigger:
Also referred to as the cause or stimulus, defines when to trigger the event. The
trigger source can be configured to use the network camera's built-in motion
detection mechanism or external digital input devices. There are four choices of
trigger sources:
Video motion detection:
–
Select this option to allow the network camera to use the built-in motion
detection mechanism as a trigger source. To enable this function, you need to
configure motion detection first. For more information, please refer to chapter
9.12 Motion detection settings.
Periodically:
–
Select this option to allow the network camera to trigger an event periodically.
The max. value that can be set is 999 minutes.
Digital input:
–
Select one of the digital inputs to allow the network camera to use an external
digital input device as a trigger source. Depending on your applications, there
are digital input devices available on the market that sense e.g. any changes in
temperature, vibration, sound and light, etc.
System boot:
–
Select this option to allow the network camera to trigger when the power of the
network camera is disconnected.
Event Schedule:
The effective period in which the event stays active. Specify the effective period for
the event.
Select the days on a weekly basis.
–
Select the time for recording in 24-hr time.
–
Action:
Also referred to as the effect, defines the action to be performed by the network
camera when the trigger is activated. Select the action to be performed when a
trigger is activated.
Trigger digital output for ..... seconds:
–
Select this option to activate an external digital output device when an event is
triggered. Specify the duration of the trigger interval in the text box.
Server name / Media name:
–
Select the server and media name to allow the network camera to send the
media files to the server when a trigger is activated.
When completed, mark the checkbox Enable this event. Click Save for your
settings to take effect and then click Close to exit this page. The new event name
will appear in the event drop-down list on the application page. To remove an event
setting from the list, select an event name from the drop-down list and then click
Delete.
05.2009