Siemens CCIC1410 Configuration Manual page 73

Siemens Building Technologies
Fire Safety & Security Products
Enable motion detection
1. Mark the checkbox Enable motion detection to enable this function.
The Percentage Indicator will rise or fall depending on the image variation. When
motions are detected by the network camera and the percentage exceeds the
defined threshold, a red bar rises. Meanwhile, the motion detection window will be
displayed with a red frame around it. Photos or videos can be captured instantly
and be sent to the remote server (Email, FTP) by utilizing this feature as a trigger
source.
A green bar indicates that even though motions are detected, the event will not be
triggered because the image variations are still below the defined threshold.
Configuration with the CCIC1410 Homepage
73
05.2009