Safety And Conformity; Markings On This Product; Safety Instructions - Growatt 2000-US Operation Manual

1.6 Markings on this product

Symbol
Warning regarding dangerous voltage
The product works with high voltage. All work on the
product must only be performed as described in its
documentation.
Beware of hot surface
The product can become hot during operation. Do not
touch the product during operation.
Observe the operating instructions
Read the product's documentation before working on it.
Follow all safety precautions and instructions as
described in the documentation.
FCC certificate
Intertek ETL mark
it apply to the Growatt -US series certify that the inverter
meet the safety standard UL1741.
Point of connection for grounding protection.
Direct Current (DC)
Alternating Current (AC)
3
description

Safety and conformity

Safety and conformity

2.1 Safety Instructions

Danger to life due to lethal voltages!
Lethal voltages are present within the unit and on the power
supply lines. Therefore, only authorized electricians may
install and open the unit.
Even when the unit is disconnected, high contact voltages
may still be present within the unit.
DANGER
Danger of burn injuries due to hot enclosure parts!
During operation, the four sides of the enclosure lid and the
heat sink may become hot.
Only touch the front enclosure lid during operation.
DANGER
Possible damage to health as a result of the effects of
radiation!
In special cases, there may still be interference for the
specified application area despite maintaining standardized
emission limit values (e.g. when sensitive equipment is
located at the setup location or when the setup location is
near radio or television receivers).In this case, the operator is
obliged to take proper action to rectify the situation.
CAUTION
Do not stay closer than 20 cm to the inverter for any length
of time.
Grounding the PV generator
Comply with the local requirements for grounding the PV
modules and the PV generator. Growatt recommends
connecting the generator frame and other electrically
NOTICE conductive surfaces in a manner which ensures continuous
conduction with ground these in order to have optimal
protection of the system and personnel.
2 2
4