Setting the feed dog
Moving the feed dog
Fig. 24: Moving the feed dog
(1) - Screw
(2) - Lever
(3) - Feed dog carrier
To move the feed dog:
1. Execute the service routine Feed dog > PosToNeedle ( p. 14).
The software is used to define the necessary presettings on
2. Disassemble the throat plate ( p. 22).
3. Loosen screws (1) and (5).
4. Loosen the threaded pins on the stroke eccentric (4).
5. Move the feed dog carrier (3).
6. Tighten screws (1) and (5).
7. Finish the service routine.
Service Instructions 869-M PREMIUM - 00.0 - 07/2018
①
②
the machine.
Place the removed throat plate next to it as an aid for orientation so
that the feed dog can be screwed on straight.
③
④
(4) - Stroke eccentric
(5) - Screw
⑤
37