2. Turn the handwheel until the appropriate arresting groove (1) or (2) is
3. Insert the locking peg (3) with the appropriate end into arresting
Removing the lock
To remove the lock:
1. Pull the locking peg (3) out of arresting groove (1) or (2).
2. Insert the plug into the locking opening (4).
26
in front of the locking opening (4):
• Small arresting groove at handwheel position needle bar at top
dead center
• Large arresting groove at handwheel position needle bar to bottom
dead center
groove (1) or (2).
Service Instructions 869-M PREMIUM - 00.0 - 07/2018
Working basis