Exhaust Waste Vapor Condenser Peltronic ® With Level Sensor - vacuubrand Peltronic Instructions For Use Manual

Exhaust waste vapor condenser Peltronic
In case of high ambient humidity condensation may possibly occur on
the cold surfaces of the exhaust waste vapor condenser Peltronic
condensation water is dripping onto the level sensor, an accidental level
sensor alarm might be triggered. When installing a level sensor at the
exhaust waste vapor condenser Peltronic
way that no potential condensation water can drip onto the level sensor.
Avoid humidity on the sensor surface.
Valves and pressure transducers connected to the exhaust waste vapor
condenser Peltronic
directly to the controller.
NOTICE
are handled just as well as components connected
®
For optimal electromagnetic compatibility assemble a fer-
rite at all VACUU•BUS connection cables (see section
„Accessories", pg. 35).
page 33 of 44
, pay attention to install it in a
®
with level sensor
®
. If
®