vacuubrand Peltronic Instructions For Use Manual page 15

spheres. Do not operate the exhaust waste vapor
condenser Peltronic
mospheres.
➨ Equipment without the
is not approved for the condensation of potentially
explosive atmospheres. Do not condense poten-
tially explosive atmospheres with this equipment.
➨ Equipment bearing the
is approved for the condensation of potentially ex-
plosive atmospheres according to their ATEX clas-
sification imprinted on their rating plate, but it is not
approved for operation in potentially explosive at-
mospheres (see section
Equipment marking (ATEX)", pg. 20).
• Do not condense substances which may form de-
posits inside the exhaust waste vapor condens-
er Peltronic
Peltronic is not suitable for condensing substances
®
which may form deposits inside the condenser. De-
posits and condensate in the condenser may lead to
increased temperatures even to the point of exceeding
the maximum permitted temperatures.
• Check the inlet and outlet of the exhaust waste vapor
condenser Peltronic
deposits inside the condenser. Inspect the exhaust
waste vapor condenser Peltronic
if necessary. See section „Shutdown & storage", pg.
34).
• Consider interactions and chemical reactions of
the condensing media. Ensure that the materials of
the condenser's wetted parts are compatible with the
processed substances, see section „Technical data",
pg. 22.
When changing the substances processed, we rec-
ommend purging the exhaust waste vapor condenser
page 15 of 44
in potentially explosive at-
®
`
"
`
"
. The exhaust waste vapor condenser
®
, if there is a danger of forming
®
mark on the rating plate
"
mark on its rating plate
"
`
Important information:
"
regularly and clean
®