Exhaust Waste Vapor Condenser Peltronic ® With Vacuu·select - vacuubrand Peltronic Instructions For Use Manual

Exhaust waste vapor condenser Peltronic
VACUU·SELECT
Operation of the vacuum controller VACUU·SELECT and its functions
are described in the VACUU·SELECT manual.
Connection possibility 1: Connect the Peltronic
Connection possibility 2: Connect the Peltronic
The Peltronic
®
tivation":
off controller. When the controller is switched
on, the Peltronic
detected and monitored.
on controller. Then perform a component detec-
tion at the controller (menu: „Settings/Adminis-
tration/VACUU·BUS/Component detection").
condenser is listed in the context menu „Component ac-
Using component activation, a connected
Peltronic
vated or deactivated, i.e., the Peltronic
denser can remain connected but is switched
on or off at the controller as required for the
ongoing process.
Once a component detection has been per-
formed, a connected Peltronic
always be listed as activated, even if it was de-
activated prior to the component detection.
page 30 of 44
®
condenser is automatically
®
®
condenser can be individually acti-
®
with
®
condenser to a switched-
condenser to a switched-
condenser will
®
con-
®