Exhaust Waste Vapor Condenser Peltronic ® With Cvc 3000; Exhaust Waste Vapor Condenser Peltronic ® With Vnc 2 (E) (Vario) - vacuubrand Peltronic Instructions For Use Manual

Exhaust waste vapor condenser Peltronic
When switching on the controller, a connected exhaust waste vapor con-
denser Peltronic
troller is switched off. The condenser is displayed by a symbol on the
LCD of the controller with the actual condenser temperature shown in °C.
The exhaust waste vapor condenser Peltronic
ously with the controller.
In case of fault or if removing the connection cable while the controller is
switched on, a flashing warning triangle and a flashing condenser symbol
(without temperature reading) are displayed. If "Sound" is set to "On", the
controller sounds eleven blips.
Display of CVC 3000 during normal operation
Vac control
1013 .
mbar
Exhaust waste vapor condenser Peltronic
(VARIO)
When switching on the controller, a connected exhaust waste vapor con-
denser Peltronic
troller is switched off.
The exhaust waste vapor condenser Peltronic
ously with the controller.
In case of fault or if removing the connection cable while the controller is
switched on, "Ext. Err." ("external error") is displayed. If "Sound" is
set to "On", the controller sounds additionally one blip.
Display of VNC 2 in case of fault
1013mbar
Ext. Err.
is detected automatically and monitored until the con-
®
10
condenser symbol
with condenser
temperature in °C
2
is detected automatically and monitored until the con-
®
page 32 of 44
®
®
with CVC 3000
®
is switched off simultane-
Vac control
1013 .
mbar
Display of CVC 3000
in case of fault
with VNC 2 (E)
®
is switched off simultane-
2