Reinstalling The Software; General Installation Procedure - Siemens SIMATIC PC 847B Operating Instructions Manual

Maintenance and service

11.2 Reinstalling the software

11.2 Reinstalling the software
11.2.1

General installation procedure

If your software is corrupt, you can reinstall it using the recovery CD or DVD, the
Documentation and Drivers CD and the Restore DVD.
Recovery CD or DVD:
The recovery CD/DVD contains the Windows user interface with tools for configuring the
hard drives, and for installation of the operating system and the languages supported by the
operating system (MUI).
The basic language of the operating system to be installed is English. If you want to integrate
additional languages, you will need to subsequently install them from Recovery CD2 or DVD.
Documentation and Drivers CD:
Contains the documentation and the hardware drivers.
Restore DVD:
Contains a hard disk image file with the original factory software (operating system with
installed hardware drivers and monitoring software, such as SOM).
90
SIMATIC Rack PC 847B
Operating Instructions, 06/2008, A5E02203168-01