Table of Contents
Advertisement
Maintenance and service
11.2 Reinstalling the software
Note
After having modified the HDD configuration using DiskPart, restart the PC for the changes
to go into effect.
Boot once again from the Recovery CD to format the partitions.
Formatting the primary partition
1. Boot from the Recovery CD to format the partitions. Follow the on-screen instructions
2. Select "Start command prompt" in the Recovery functions window. Enter the following
NTFS is the factory setting for all Windows operating systems.
Example of a master IDE HDD
format C:/FS:NTFS
format /? Shows all command parameters.
94
until the Recovery functions window is displayed.
command in the command interface:
format DL:/FS:File System
DL = drive letter of the partition to be formatted. Valid values: C, D, E, F etc.
File system = specifies the type of file system. Valid values: FAT, FAT32, NTFS.
SIMATIC Rack PC 847B
Operating Instructions, 06/2008, A5E02203168-01
Advertisement
Table of Contents
