Service And Maintenance; General Notes About Maintenance; Maintenance Of The Friction Clutch - Siemens SIMOGEAR BA 2039 Operating Instructions Manual

Service and maintenance

5.1

General notes about maintenance

Unintentional starting of the drive unit
Secure the drive unit to prevent it from being started up unintentionally.
Attach a warning notice to the start switch.
NOTICE
Improper maintenance
Only authorized qualified personnel may perform the maintenance and servicing. Only
original parts supplied by Siemens AG may be installed.
Only qualified personnel may perform the inspection, maintenance and servicing work.
Please observe the General information and safety notes (Page 7).
5.2

Maintenance of the friction clutch

Note
Check the condition of the friction clutch initially after 500 operating hours and then at least
once yearly and after every blockage of the machine.
If necessary, readjust the friction torque or replace the wearing parts, e.g. friction lining and
bushes. Replace the friction linings only as pair. We recommend replacing worn bushes in
sets.
Refer to the relevant operating instructions for the clutch.
BA 2039
Operating Instructions, 04/2016, A5E37431501A/RS-AC
ATEX version gearboxes
All measures, checks, and their results must be documented by the operator and
records kept in a safe place for 10 years.
WARNING
5
31