Questions & Answers - Siemens SXG75 User Manual

138 Questions & Answers
Questions & Answers
If you have any questions about using your phone, visit us at
www.siemens.com/mobilephonescustomercare any time. For additional help, we have
listed below some frequently asked questions and answers.
Configuration service
To help you set up your mobile phone for the data service WAP, MMS, e-mail and Internet,
you can use a configuration service. This service is used to have the necessary settings for
your mobile phone sent to you by SMS. We recommend that you contact your network
provider who will send you the configuration messages.
As an alternative you can also use the "Setting Configurator" at
www.siemens.com/mobilephonescustomercare. Siemens will then send you the
configuration messages. Please follow the instructions contained in those messages.
Problem
Phone cannot be
switched on.
Too little standby
time.
Possible causes
On/Off key not pressed long
enough.
Flat battery.
Battery contacts dirty.
See also below under
"
error .
The operating time depends on the respective operating conditions.
Extreme temperatures significantly reduce the phone's standby time!
Some settings/functions nega-
tively affect the standby time.
Data cable connected.
Unintentional keystrokes
(illumination!).
Possible solution
Press On/Off key for at least two seconds.
Charge battery. Check charging indicator in
the display.
Clean contacts.
"
Charging
It may be useful to restrict the use of the following
functions in order to improve the standby time:
Bluetooth function, Cell Broadcast, Infrared inter-
face, Silent Alert/Vibrator Alarm, Fast Search,
GPRS, display illumination (can be adjusted to a
lower level or switched off), frequent use of organ-
iser and games, continuous animated screensaver.
When a data cable is connected, the battery will be
empty within a few hours even if there is no active
data connection at all. Connect data cable only if
necessary.
Activate auto key lock (page 130).