Siemens SXG75 User Manual page 142

Problem
PIN error/
PIN2 error.
Phone code error.
Service provider
code error.
Too few/too many
menu entries.
No fax possible.
Charge meter does
not work.
Damage
Severe shock.
Phone became wet. Remove battery and SIM. Dry immediately with a cloth, but do not apply heat. Dry
Reset all settings to factory default, page 125:
Possible causes
Three wrong entries.
Three wrong entries.
No authorisation for this service. Contact your service provider.
Functions may have been add-
ed or deleted by the service pro-
vider via the SIM card.
Wrong settings in the PC.
No authorisation for this service. Contact your service provider.
Charge pulse is not transmitted. Contact your service provider.
Remove battery and SIM and re-insert them. Do not dismantle the phone!
connector contacts thoroughly. Stand mobile upright in an air current. Do not
dismantle the phone!
Questions & Answers
Possible solution
Enter the PUK (MASTER PIN) supplied with the
SIM card according to the instructions. If the PUK
(MASTER PIN) has been lost, please contact your
service provider.
Contact Siemens Service (page 142).
Check with your service provider.
Check settings.
A
*
# 9 9 9 9 #
141